Cisco WAP121 Wireless-N Access Point with Single Point Setup

$113

Cisco WAP121 Wireless-N Access Point with Single Point Setup

Only 1 left in stock

SKU: NHC-WAP121-A-K9 Categories: , Tag:

Description

RAM installed (max)
64 MB

Flash memory installed (max)
16 MB

Connectivity technology
Wireless N

Data transfer rate
300 Mbps

Data link protocol
IEEE 802.11b/g/n

DFS support
No

Spread spectrum method
OFDM

Remote management protocol
SNMPv3, HTTP, HTTPS

Network and transport protocol
DHCP, Bonjour

Frequency band
2.4 GHz

Number of radios
1

Multiple input, multiple output (MIMO)
2 x 2:2

Maximum active WLAN clients
16

Number of access points supported per cluster
4

Status indicators
Power, WLAN, LAN

Features
DHCP support, load balancing, VLAN support, syslog support, email alert, IPv6 , Wireless Distribution System (WDS) support, firmware upgradable, wall mountable, Spanning Tree Protocol (STP), Wi-Fi Multimedia (WMM) support, access control list (ACL) support, quality of service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS), multiple SSID support, wireless bridge mode, IPv4 support, rogue access point detection, captive portal, Single Point Setup
Roaming 802.11r (when supported by driver)

Encryption algorithm
WPA Personal, WPA Enterprise

Authentication method
RADIUS, Radio Service Set ID (SSID)

Compliant standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b/d/e/g/i/n, IEEE 802.3af, IEEE 802.1X, Wi-Fi Protected Setup

Antenna
2 x internal PIFA

Gain level
2 dBi

Expansion and Connectivity
Interfaces Ethernet 10BASE-T/100BASE-TX/1000BASE-T; RJ-45

Width 4.9 in. (12.44 cm)
Depth 4.9 in. (12.44 cm)
Height 1.4 in. (3.55 cm)
Weight 167.26 gm

Additional information

Weight 0.55 kg
Dimensions 125 × 125 × 40 mm
Brand

Warranty (Months)

120

Stock

Stock Availability By State as at 24/06/2019 01:00 AEST

QLD 0
NSW 1
SA 0
VIC 0
WA 0